Seeker Knowledge

MIG Welding Aluminum with Hobart Ironman 210 and Miller Spoolmate 185

Welding Aluminum

Welding Aluminum photo 1
(1) Hobart, Ironman 210 MIG welder
(1) Hobart, Ironman 210 MIG welder
(2) Spoolmate 185, spool gun with a DIY water cooled barrel.
(2) Spoolmate 185, spool gun with a DIY water cooled barrel.
(3) Opened up for cleaning.
(3) Opened up for cleaning.
(5) PanchoVilla, the infamous outlaw and revolutionary known for his fondness of large guns.
(5) PanchoVilla, the infamous outlaw and revolutionary known for his fondness of large guns.
(4) Long Reach option.
(4) Long Reach option.
(1) Crank it up and spray arc!
(1) Crank it up and spray arc!
(2) Right side is level 4, the wire speed is 300 in/min . Left side is level 6 at 370 in/min.
(2) Right side is level 4, the wire speed is 300 in/min . Left side is level 6 at 370 in/min.
(3) Spray weld on 3/16 inch.
(3) Spray weld on 3/16 inch.
Welding Aluminum photo 10
Good lighting and a hand rest.
Good lighting and a hand rest.
Weld small parts on and then trim them to size.
Weld small parts on and then trim them to size.
Welding Aluminum photo 13
Welding Aluminum photo 14
Welding Aluminum photo 15
Welding Sunburn
Welding Sunburn
(1) Ballast sled / battery box.
(1) Ballast sled / battery box.
(2) Exhaust manifold.
(2) Exhaust manifold.
(3) Pressure testing the manifold.
(3) Pressure testing the manifold.

Talk to Doug

Have a question or comment about this video?

Talk to Doug